P.Audio SN12-500CX Динамик 308мм/12", коаксиальный, НЧ-СЧ 350 Вт.(RMS) / 500 Вт.(AES), 8 Ом., 55-20000Гц, 98 дБ(Вт/м), катушка 3,25", СЧ-ВЧ драйвер, 25мм/1", 35 Вт.(RMS) / 50 Вт.(AES) , 8 Ом., 1200-20000Гц, 106 дБ(Вт/м), катушка 1,75".

The P Audio SN12-500CX is a high performance coaxial transducer. The
SN12-500CX is an upgraded design that features many of P Audio’s new
technologies and performance upgrades. The low frequency section utilizes
a large diameter voice coil design while the high frequency section employs
a medium format titanium diaphragm assembly. The 12 inch (305mm)
diameter piston will produce extremely high sound pressure levels at both
low and mid band frequencies and is ideal for high level response in both
live sound and recorded music venues. The transducer uses very high
energy neodymium magnetics to achieve a very high acoustic output to
weight ratio. The SN12-500CX has been optimized for use in two way or
three way sound reinforcement systems and has an operating range of
55Hz to 20000Hz.
The SN12-500CX features a large 3.25 inch (82.5mm) diameter voice coil
that provides an AES rated 500 watts of continuous power handling and a
full 2000 watts of peak rated power handling when sufficient amplifier
headroom is available. The SN12-500CX employs P Audio’s under damper
venting to control turbulent air flow.
The voice coil design is a bobbin wound geometry with P Audio’s inside/outside
wire technology to improve conversion efficiency and provide a large
cross-sectional area for superior cooling.
The high frequency section is a close spaced titanium diaphragm assembly.
The diaphragm is a 2.5 inch (63.5mm) diaphragm that provides excellent high
frequency response and superior power handling and durability. The horn
loading is a thru pole piece design that uses the low frequency cone as part
of the final horn flare. The overall high frequency design provides very high
sensitivity.
The transducer chassis is a die cast aluminum design that insures a very
high degree of structural integrity.